Tachograph calibration and operator duties: inspections, faults and records
How often tachographs must be inspected and recalibrated, what operators must do when a unit fails, and the other tachograph duties GOV.UK lists.
Last checked against primary sources on 18 November 2026. Rules change: always check the current guidance.
Calibration and inspection
Confirm all requirements are met before a new or used vehicle enters service.
- Analogue tachographs must be inspected every 2 years and recalibrated every 6 years.
- Digital and smart tachographs must be recalibrated every 2 years.
- Recalibrate digital and smart units after any repair, after a change of registration number, if UTC is out by more than 20 minutes, and after a change to tyre circumference or characteristic coefficient.
- The work must be done by a vehicle manufacturer or an approved calibration centre, with an installation plaque fitted.
When a unit breaks down
- Repair faults as soon as possible. If the vehicle cannot return to base within a week, repair it en route.
- For digital or smart units, ask the repair centre to download the data. If that fails, obtain a certificate of undownloadability.
- Keep a certificate of undownloadability for at least 12 months.
Other operator duties GOV.UK lists
- Supply enough type-approved charts and print roll to drivers.
- Recover used charts and manual records from drivers, including after a driver leaves, until all records are returned.
- Train and instruct drivers on the hours rules and correct tachograph use.
- Schedule work so the rules can be met.
- Avoid pay linked to delivery speed, distance or load volume where this could encourage breaches.
- Provide copies of charts, manual records and digital data to drivers on request.
- Take all reasonable steps to prevent breaches of the rules.
Downloads and retention
Download driver cards at least every 28 calendar days and vehicle units at least every 90 calendar days, and be able to produce records to enforcement officers for 12 months. Our download deadlines guide covers this in full.
Common questions
How often does a digital tachograph need calibrating?
GOV.UK says digital and smart tachographs must be recalibrated every 2 years, and also after events such as a repair or a change of registration number.
How often are analogue tachographs inspected?
GOV.UK says analogue tachographs must be inspected every 2 years and recalibrated every 6 years.
What if a tachograph unit cannot be downloaded?
Ask the repair centre to download the data. If that fails, obtain a certificate of undownloadability and keep it for at least 12 months.
Tools and templates for this
Sources
This is a template to help you write a clear letter. It is not legal advice, and rules and procedures change. Check the current GOV.UK guidance (linked below) and, for anything serious, speak to a transport solicitor or compliance adviser before you send it.
New guides and rule changes, weekly
Short, practical updates for small hauliers. Unsubscribe any time.